| Number of USB 2.0 Ports | 2 |
|---|---|
| Number of USB 3.0 Ports | 2 |
Customers also viewed these products
Page 1 of 1 Start overPage 1 of 1
Reviews with images
Very solid easy case with room to play for a great price.
Ok, this build is done and I am ready to let you know about this case. First is came without any problems packaged great and looks good. Now this started out as a Ryzen 2200G ITX build for my 5 year old so the looks of this case really had a lot to do with me buying it, it just looks cool. Now first this thing is well built with nothing seeming loose and solid construction. The Basement design is great and it saved me some money on my power supply with lots of room to hide the cables without hurting air flow. It also has a very good setup for the drive bays and in my case USB drives for the system, again it all fits and works very well. The horizonal mother board tray worked great in the build letting me do everything but hook up the wires outside of the case. The one thing I will say this is an APU only so if you have cards the window wont be of much use for showing off anything but that and maybe some back lighting. This case strips down well with access to every area you need to get to easily even if the documentation is lacking (found some great videos online). My only complaint is the front panel wiring is really about 5 inch to short for the mother board I went with (a ASUS TUF B350M-Plus Gaming mATX) and made the cable management only so so with most of it crossing the window, so the ITX boards would have most likely have been better looking for what its worth. That being said the mATX fit great and really shows off in this case without cards hiding things. Air flow in this case should be good but the included fans would only be good for a basic system. The top vents don't open up as much as I would have liked (and I will force them open after I add RGB fans later) and I have no clue why anyone would use the front panel fan controls (or risk over heating due to them but I have some ideas on other things they might work for in this build). You also have all kinds of options for upgrading the fans or going under water with this case so it would be one to look at for a portable (luggable) case or like me for one that someone can grow with it.Pros: Very solid case with great looks, Very easy build space with room to play, Lots of room to grow in a small size, mATX / ITX form factor. personalize with lots of room ;).Cons: Short front panel cables for some boards, Window will only shows cards and some backlighting.Top fins/ front panel controls could be cooling issue if used.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on January 21, 2018
Just used this for my 8 year old son's first build. I've never seen a case this inexpensive, with such a quality build. As other reviewers have said, there are no sharp edges which is nice. Also, it fits a full size power supply and graphics card. We stuffed my older GTX 770 in it and it just fits, but it's a a very large card. One of the heat pipes on the 770 bumps up against the CD-ROM tray, but there's no pressure on it. Also, the CD-ROM tray is removable if you don't need one. Lots of thumbscrews which is nice. They are on both side panels, add in card clamp, and hard drive tray. Nothing needed to be forced, all holes line up and the removable motherboard tray was very helpful. It comes with two fans (large 200mm on the front an 140mm on the back), Two fan controller knobs, 2 usb 3.0 ports, and headphone/mic jacks on the front of the case. Each knob can control 3 fans. Air flow is excellent. It's great how all the wires are also under the side window and all you see is the graphics card, no messy wires. Also the top fins are adjustable. So, if you don't have a fan in the top you can just close them to force air through the back of the case. The only con I can think of is the connector leads for the power switch, hdd led, etc... are a little short. They all fit without extenders, but they would look better in the case if we didn't have to take short cuts to the motherboard connectors and could route them where you can't see them. Also, it is not a small case for miro/atx mini and takes up a pretty large footprint. These are nitpicks though, and doesn't take away from the case at all which has a great design. You really can't go wrong with it.
Images in this review
Reviewed in the United States on July 24, 2018
Pros: Very solid case with great looks, Very easy build space with room to play, Lots of room to grow in a small size, mATX / ITX form factor. personalize with lots of room ;).
Cons: Short front panel cables for some boards, Window will only shows cards and some backlighting.Top fins/ front panel controls could be cooling issue if used.
Very solid easy case with room to play for a great price.
Reviewed in the United States on July 24, 2018
Ok, this build is done and I am ready to let you know about this case. First is came without any problems packaged great and looks good. Now this started out as a Ryzen 2200G ITX build for my 5 year old so the looks of this case really had a lot to do with me buying it, it just looks cool. Now first this thing is well built with nothing seeming loose and solid construction. The Basement design is great and it saved me some money on my power supply with lots of room to hide the cables without hurting air flow. It also has a very good setup for the drive bays and in my case USB drives for the system, again it all fits and works very well. The horizonal mother board tray worked great in the build letting me do everything but hook up the wires outside of the case. The one thing I will say this is an APU only so if you have cards the window wont be of much use for showing off anything but that and maybe some back lighting. This case strips down well with access to every area you need to get to easily even if the documentation is lacking (found some great videos online). My only complaint is the front panel wiring is really about 5 inch to short for the mother board I went with (a ASUS TUF B350M-Plus Gaming mATX) and made the cable management only so so with most of it crossing the window, so the ITX boards would have most likely have been better looking for what its worth. That being said the mATX fit great and really shows off in this case without cards hiding things. Air flow in this case should be good but the included fans would only be good for a basic system. The top vents don't open up as much as I would have liked (and I will force them open after I add RGB fans later) and I have no clue why anyone would use the front panel fan controls (or risk over heating due to them but I have some ideas on other things they might work for in this build). You also have all kinds of options for upgrading the fans or going under water with this case so it would be one to look at for a portable (luggable) case or like me for one that someone can grow with it.Reviewed in the United States on July 24, 2018
Pros: Very solid case with great looks, Very easy build space with room to play, Lots of room to grow in a small size, mATX / ITX form factor. personalize with lots of room ;).
Cons: Short front panel cables for some boards, Window will only shows cards and some backlighting.Top fins/ front panel controls could be cooling issue if used.
Images in this review
Reviewed in the United States on April 29, 2018
