The ease of setup of the Cisco-Linksys E3000 router astonished me! I had a studio and household FILLED with multiple PC's and Macs, both desktop and notebook computers, and a PC server plus Mac G5 server for my AppleTV Library, iTunes Library, and this router self-configured itself with each and every computer/device/system that I own, some 12 machines in total, in less than 7 minutes for the full cycle of the auto-connect feature to take place.
That FLOORED me totally, and I'm an advanced networking expert, who was prepared for a completely tough, manual install of this router but figured I'd give it a go with the Auto-Connect Feature of this router, by simply inserting the Cisco-Linksys CD ROM into my PC server's optical drive, and followed the prompts to the letter (to a point), let the router Auto-Configure each and every PC and Mac in my mixed-stable of computers here in my studio and throughout the house, 8 computers here in my studio near the router's plug-in to my Time-Warner RoadRunner HS Turbo Modem, and 4 other computers elsewhere in the house, and I'll be danged if the new E3000 didn't pull off the complete connection routing in less than 7 minutes actual time! CRAZY GOOD!
I immediately fired up the router's web interface and went into the Advanced settings, and renamed the System from default to my regular/normal System's name, set up the web interface for my network Hard Drive and plugged in a 1TB USB external HD for network sharing and backup services, reconfigured the password to my rather complex 26-digit and symbol password for ultimate security purposes, set the "renew DHCP Lease" to my own specific schedule apart from default, adjusted Media and FTP Server setting to active, and a lot of other "host services" to manual settings vs the default settings, and in less than 30 minutes total time I disconnected my former "N-Spec" router, and turned the duties over to the new E3000.
Suffice to say it's been literally plug and play since then, with only a minor glitch to report, and that was perhaps my own fault but it involved updating the firmware to the latest and greatest, and my update went awry somewhat...I ended up having to re-apply the new patch TWICE before it took and set up correctly, and BAM!! All was well again, settings were intact, and when I restarted the System it fired right up, everything popped up green, blue, and yellow LED's like it's supposed to do, and voila! Firmware update a success, all was well, and the system @ 100%.
The Dual-Band aspect of this router gives it a special character, with the ability to transmit and receive signals and data simultaneously, at the same time literally, and maintain its incredible bandwidth in both the 2.4Ghz and 5.8Ghz channels without fault of any sort, and that's an amazing feature! My AppleTV system works significantly better than it did with the old MaxPower N-Spec Routerat full speed ahead, it being a single-band router and some 5 years old at the time I replaced it with the E3000.
I find the web interface to be simple, and simplistic too, a nice interaction to work with when you want to customize any features, or change any settings manually vs the router's automatic setups. I have yet to have to restart or "recycle" this router after some 5 months of use thus far, which I consider to be very, very unusual given the nature of routers in general, but the Cisco-Linksys E3000 seems to be in a class by itself with respect to sustainability. It is also a router that you can place ANYWHERE with respect to its antennas being all internal (6 of them!), as I have placed it UNDER MY WORK STATION now, and there's no difference in the signal being all-pervasive and strong throughout my studio, and home to boot!
I also use the router to handle the Administration of my twin RAID system's web interface, and that uses one of the Gigabit Ethernet Ports of the E3000 and plugs directly into the Areca 1680IX-8 Hardware RAID Controller, and that feature of the router has also worked without fail thus far, no issues at all! I have searched and tried to figure out S*O*M*E* weakness that this new E3000 router has, but alas there is nothing left to write or say with respect to things that are wrong with it, because the dang thing just works 100% for the good!
Every day that I use my system here in the studio and throughout my home I marvel at its consistency, it steadfastness, and its power, just incredible in all those aspects of use with my heavy, heavy needs placed upon it, and it's just fantastic. It would be hard to say "it could be better", because I just don't know HOW or WHAT we could do so as to make it better than it is right now.
I am transmitting millions and millions of bytes of critical information up to Standford University in the Folding@Home program, with 5 active computers in the program here in my home and studio, and it's IMPORTANT that each and every byte gets transmitted up there for the benefit of mankind, and the critical research that the researchers are doing, and this great Cisco-Linksys E3000 keeps the candles "lit" in my contributions to the Folding@Home program hour by hour, day by day, and week by arduous week...it just doesn't fail me, and that is all I could ask of it!
I never thought I'd say something like this about a router, but this thing is SO FAR AHEAD of everything else out there that you can buy for your home or office use for a high-speed data network, be it from a HD Cable Modem system like what I have with me here, a DSL system, whatever way you can critically look at such a thing as a router which literally is the lifeline between you and the internet, and all it can represent, but I'll say this for the record: I don't think that there's anything better being made today, AT ANY PRICE, ANY CONFIGURATION, ANY SETUP WHATSOEVER THAN THE CICSO-LINKSYS E3000 Router!
This thing is King of the Hill! I have actually purchased 4 of them since they were released in early June, 2010. The router that I bought this time went down to Australia to my business partner's home office to use there, because he cannot buy one in Australia at any price: they just aren't offered there yet, so I took it upon myself to score one for him and the network in his home office, and he is just like I am by now: a believer in this E3000 system 100% without qualification, without doubts, and without any negative thoughts whatsoever!
It's not every day that we have products this good come into our lives and uses, and this ladies and gentlemen is the best router that the good, old All-American $$$ can buy, bar none, no doubt as to that statement! The Cisco-Linksys E3000 Dual Band Router gets the Wavey Davey 100% Solid Gold and 5-Star Award for Quality, Value, and Performance, bar none! There isn't anything quite like it no matter what other brands you look at, or even other Cisco-Linksys models for that matter, it stands alone as the No.1 router of any type today, in November 2010.
Wavey Davey - November 14, 2010
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Consider a similar item
$19.99
Climate Pledge Friendly Frequently bought together
$94.95
Get it as soon as Thursday, May 23
Only 1 left in stock - order soon.
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
From the brand
-
- Linksys Cognitive Mesh technology intelligently optimizes mesh network performance based on real-time data
- Linksys Cognitive Mesh WiFi 6E mesh router opens brand-new access to 160 MHz channels dedicated to the fastest & newest devices, with true gigabit speeds up to 5.4 Gbps
- Linksys Cognitive WIFI 6E provides stability across your whole home mesh WiFi system.
-
Linksys Cognitive Mesh WIFI 6E
-
Linksys Velop Pro WIFI 6E
Cognitive Mesh Router with 6 Ghz Band (AXE5400) Gbps True Gigabit Speed - Whole-Home Coverage up to 3,000 sq. ft. & 200+ Devices
-
-
-
Compare with similar items
This Item  Linksys Open Source WiFi Wireless-G Broadband Router, Speeds up to (AC1200) 1.2Gbps - WRT54GL |  |  |  |  |  | |
| Price | $94.95 | $199.99 | -17% $74.99 Typical: $89.99 | -27% $94.99 List: $129.99 | -32% $88.60 List: $129.99 | -19% $40.49 List: $49.99 |
| Delivery | Get it as soon as Thursday, May 23 | Get it as soon as Thursday, May 23 | Get it as soon as Thursday, May 23 | Get it as soon as Thursday, May 23 | Get it as soon as Thursday, May 23 | Get it as soon as Thursday, May 23 |
| Customer Ratings | ||||||
| User interface | ||||||
| WiFi signal | ||||||
| Tech Support | ||||||
| Value for money | ||||||
| Easy to install | ||||||
| Sold By | Denis Goods and Services | Amazon.com | Reyee Direct | Reyee Direct | Amazon.com | Amazon.com |
| connectivity tech | WiFi | Wi-Fi, Ethernet | Ethernet, Wi-Fi | Ethernet | Wi-Fi | Wi-Fi, Ethernet |
| number of ports | 4 | 5 | 3 | 5 | 5 | 5 |
| data transfer rate | 54 megabits per second | 5400 megabits per second | 3000 megabits per second | 3200 megabits per second | 2976 megabits per second | 1167 megabits per second |
| wireless standard | 802 11 BG | 802 11 AX, 802 11 AC, 802 11 N | 802 11 AX, 802 11 AC, 802 11 B, 802 11 N | 802 11 AX, 802 11 AC, 802 11 N, 802 11 G, 802 11 B | 802 11 AX, 802 11 AC, 802 11 B, 802 11 G, 802 11 N | 802 11 AC, 802 11 N, 802 11 B, 802 11 G, 802 11 A |
| frequency band class | quad band | dual band | dual band | dual band | dual band | dual band |
| lan port bandwidth | 10/100 megabits per second | — | 1000Mbps | 10/100 megabits per second | 10/100/1000 Mbps | 10/100/1000 Mbps |
From the manufacturer
Linksys WRT router is versatile and customizable.
WRT54GL Wi-Fi Wireless-G Router
At a Glance:
- Linux-based, open-source firmware allows you to customize your device
- Four Fast Ethernet ports to extend your wired network
- Wireless speeds up to 54 Mbps, supporting 802.11b and 802.11g
- WPA2 wireless encryption and SPI firewall for security
- Parental controls offer easy-to-configure restricted Internet access
Linksys WRT54GL Wi-Fi Wireless-G Router
Versatile Router Also Functions as Access Point and Switch
The Linksys WRT54GL Wireless-G Router delivers the functionality of three network devices in one. When used as a wireless access point, the WRT54GL delivers wireless data transfer rates up to 54 Mbps, supporting Wireless-G and Wireless-B devices.
Full-duplex Fast Ethernet ports enable you to connect up to four wired Ethernet devices to scale your network to best fit your needs, while the router functionality ties your network together to share a high-speed cable or DSL connection securely throughout your home or office.
|
|
|
|
|
|---|---|---|---|
Open Source Firmware for Custom ConfigurationsWhile the Linksys WRT54GL comes with ready-to-use firmware that allows you to control and extend your network, open source, Linux-based firmware can also be modified to provide additional customization. With easy-to-find tools readily available online, you can transform the WRT54GL into a commercial-grade wireless device featuring enterprise-level functionality with minimal effort and minimal cost. |
Wired Connections Expand Your NetworkEquipped with four full-duplex Fast Ethernet ports, the WRT54GL allows you to further extend your network to fit your needs. For small networks, simply connect four computers directly to the router, or expand your wired access by connecting additional network hardware. The WRT54GL is designed to be physically stackable, allowing you to mount additional WRT54GL routers to further expand your network. |
Security Features Provide a Safe ConnectionFeaturing a full suite of advanced security features, the Linksys WRT54GL provides you with a safe way to stay connected. A combination of WPA2 encryption and SPI firewall offer enhanced wireless security for your Wi-Fi connected devices, while Internet Access Restrictions enable you to limit Web usage in your home. Thanks to a convenient browser-based interface, configuring secure access is a simple task, allowing the whole family to surf with peace of mind. |
Easy 1-2-3 SetupGetting the WRT54GL up and running is simple. Just plug the router into a power source, connect it to your Internet modem and your computer or laptop, then run the Setup Wizard on the included CD-ROM and follow the instructions. |
Four Fast Ethernet Ports for wired network connections.
What's in the Box
Linksys WRT54GL Wi-Fi Wireless-G Router, quick-start guide and setup software on CD-ROM, and Ethernet cable.
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
2:41
Click to play video
the TRUTH about the Linksys WiFi 5 Router
Jack Mathews
Videos for this product
0:41
Click to play video
Its Time to Go Wireless
Merchant Video
Videos for this product
2:01
Click to play video
Why You Want a Wireless Network in Your Home
Merchant Video
Reviews with images
Solved problems with firmware....Indefinite "waiting" and "2118" errors, when it allows a log in...
Problems right from the start.Non-stop 2118 errors, when logged into 192.168.1.1, while trying to click on ANY of the options to manually config.If I don't get the 2118 error, it'll show a blank screen, or "waiting" indefinitely.Have to hard reset router regularly just to get it to work for a few minutes for a manual log-in. But, router won't save any settings or it gets stuck on the blank screen "waiting" forever. Youtube videos show others can click on an option and it comes up in a second or two but mine won't. Another error is that router keeps stating that internet is down, yet I can surf from another browser window or tab, like for this review.I've tried several different laptops, desktops, browsers, and operating systems, and 'no joy' with any plugged into this router, and even created a non-needed useless linksys login identity which just won't 'link' to this router either.I will RMA this failed unit and hope that the replacement works. If the replacement works, I will update this review accordingly.UPDATE:Well, Amazon over-nighted a replacement router. Same problems. When using ANY browser(IE, Firefox, Chrome), Windows 7,8,10(and even XP) with the antivirus and any/all security settings turned off, I just can't make ANY changes to the router from its browser log in. That's 2 routers in a row that can't be adjusted using a simple browser log in. Besides regular 2118 errors and indefinite "waiting", the new router also has 2117 errors.BTW, you can manually download the latest firmware. FW_WRT3200ACM_1.0.6.181063_prod is available for download and my routers shipped with 1.0.5.175944 which didn't not allow browser settings changes.If you can't log into router, you can't update it. The automatic firmware update(via Android phone app) doesn't see the latest firmware that you can manual download to a PC. Auto update(via Android app) says no new firmware is available even though the downloadable, from the Linksys website, firmware is newer than what the router is equipped with.Additional update and review, after battling with router #2 for a couple days, I decided to do another reset and just leave it alone. After a few hours, using the Linksys cellphone app, it finally was able to update itself with the previous mentioned firmware update. I would guess that the LInksys support made that happen. That did the trick and after a reboot, router is now responding to my browsers. I was able to config/save my settings and now the wireless network is working just fine.I don't want "email" log in, Linksys membership smart-wifi log in, or auto-anything-easy-quick config by default.Loses 1 star because firmware updates took a while to go from website to router's auto-update.Loses another star because router browser settings uses stupid silly "pop-up's" instead of normal browser pages like older routers. Pop-up script can easily be blocked by a pop-up blocker or script stopper(that is, a browser with some security settings). Pop-up's can also be stopped by aggressive antivirus-settings, browser ad-blockers,...... The engineer that wanted that should be fired.In the end, this router goes from 1 start to 3 stars. I don't want a "cool" router with apps and silly config page pop-ups. I want a usable router that I can manually set up quickly, update as needed, and then put to work!Linksys, get rid of the pop-up's when clicking on ANYTHING when accessing the router's menus. What was Linksys thinking? Every browser pretty much has a pop-up killer now.Update 12/22/2018:With the latest firmware and selective router manual configurations, router has served well until drowning during hurricane Michael. I'd wager most negatives reviews are caused by either older firmware, or not choosing the proper wireless options for your network. Since it ran nonstop since the firmware update without issues, I've bumped up the rating to 5 stars. If you buy this router, learn how to log into it(no quick setups or phone ap's), and go thru each step by step option. Eliminating "B" and "G" wireless using only "N" or "A/C".... is good start, setting priorities and specific options in your phones, laptops, TV, bluray, audio receiver..... can make your WIFI super fast, well managed, and safe.I replaced my flooded WRT AC3200 with the Gaming Router WRT32X(seriously lacking options and overly dumbed downed user interface). It too works great but I prefer the config/options of the non-gaming router. And, for better reception/distance, Linksys offers high gain antennas which are about twice as tall, and provides exceptional capability an acre away in my work shed.Current Firmware for the WRT AC3200ACM is 1.0.6.186168, released in January of 2018. If the router doesn't automatically update to this firmware, do a manual update.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Top reviews from other countries
Miguel Rosas
Difícil configurar
Reviewed in Mexico on January 20, 2024Style: B09Y68BYQ9Verified Purchase
Ramon Pulido
Reconstruido no es opción
Reviewed in Mexico on July 31, 2023Style: MR6350-RM4Verified Purchase
Jean-Francois Langevin
Article usagé
Reviewed in Canada on July 10, 2023Style: Router OnlyVerified Purchase
