I couldn't be happier with this tool. I bought it to cut door trim preparatory to installing 3/4" oak flooring. I chose this one because it seems to be heavy duty, has a good heavy duty case and comes with a large assortment of blades. Knowing that I would encounter nails, I used one of the metal and wood cutting blades that has gotten me through that entire project. The metal cutting blade has finally dulled but only after running into a hardened steel screw. That is the only blade I have dulled. I have used a wood cutting blade to cut off the many dozens of plugs I glued into screw holes around the perimeter of the rooms where the boards had to be screwed to the subfloor. That blade is still sharp. The tool runs with little vibration and seems to be holding up well. It's noise level is not bothersome and the lack of vibration means my hands do not feel tired after using it extensively. I have used the sander only a little but it is useful in corners and very near the wall where a larger sander will not fit. Judging by the sanding dust produced, I think it eats through a rough place quickly and smooths it out efficiently. I only wish I could figure out a way to connect a dust collection hose, but I think there is not a way to do that. The cord is 10 feet long and I almost never need to bring out an extension cord since I am almost always within range of a wall plug. Those reviewers who find the saw blades do not last long might try slowing down and not forcing the blade into a cut. Especially when sawing into nails. This tool works best when you let it do the work. Push it into the work only after the blade has cut material away. If you force it, the blade will overheat and most likely the tool will also.
The case fits nicely and has room for the full complement of blades and sanding pads. These days, I do not purchase a new tool without a good case. That is the best way to extend the life of a tool and reduce the time it takes to set up for an operation since all the required stuff is at hand in the case.
| Manufacturer | PORTER-CABLE |
|---|---|
| Part Number | PCE605K52 |
| Item Weight | 0.01 ounces |
| Product Dimensions | 14.96 x 4.33 x 11.02 inches |
| Item model number | PCE605K52 |
| Is Discontinued By Manufacturer | No |
| Style | Oscillating kit |
| Material | Metal |
| Power Source | Corded Electric |
| Item Package Quantity | 1 |
| Cord Length | 10 Feet |
| Number of Handles | 1 |
| Included Components | bare-tool; attachments |
| Batteries Included? | No |
| Batteries Required? | No |
| Warranty Description | 3-Year Limited Warranty |
