Currently unavailable.
We don't know when or if this item will be back in stock.
Select delivery location

Orion Motor Tech Auto-Leveling 3D Printer with Resume Printing Function, 2.8-Inch Sensitive Touch Screen, and Filament Detection, Stable Structure Sealed Metal Plates 220x220x250mm

3.4 3.4 out of 5 stars 20 ratings
Currently unavailable.
We don't know when or if this item will be back in stock.
Brand Orion Motor Tech
Item Weight 16 Pounds
Compatible Devices Laptop, Smartphone
Operating System Linux
Compatible Material Metal

Product Description

banner

Auto-Leveling 3D Printer with Resume Printing Function, 2.8-Inch Sensitive Touch Screen, and Filament Detection, Stable Structure Sealed Metal Plates

Bring any and every plastic design to life with professional prowess and exceptional ease using the Orion Motor Tech Auto-Leveling 3D Printer. The ideal printing tool for novices and experts alike, this unit come with an automatic leveling feature to keep itself perfectly balanced during production, along with a manual leveling mode to let experienced creators apply their own settings. But however you opt to operate the device, top-quality performance defines its every print job thanks to the powerful, industrial-grade processor powering its operation—along with its automatic overcurrent protection, overload safety, thermal runaway protection, anti-reverse capability, auto filament dispenser, and resume printing feature. Coupled with all those safety measures is the printer's insulated design that puts its motor at the bottom of the unit, meaning its wires have less exposure to the outside air. That smart design continues with the tempered-glass hot bed, which functions as a reliable heat conductor as well as hiding four strong springs that ensure lasting usability even in high-temperature environments. And since the unit arrives fully assembled and with a simple user manual, it all takes less than half an hour for even a beginner to install, while operating the unit coming happens as easily through the intuitive, high-precision touch screen controls. Make even the most imaginative shapes and creations turn real with the Orion Motor Tech Auto-Leveling 3D Printer.

a

b

c

d

Auto Leveling

This 3D printer features an auto leveling mechanism that allows a self-calibration of the hot bed before every new task, sparing you the trouble of manual leveling.

Sensitive Touch Screen

You can easily operate the printer through the 2.8" high precision touch screen that supports 3 different languages.

Industrial Grade Chip

An industrial grade chip is adopted to ensure a more accurate and smoother printing. Overload and overcurrent protections are installed in the system for safe and reliable operation. Don’t worry about accidental blackout or filament fracture, since the printer is designed to restart printing from where it’s been left off.

Glass Bed with Strong Springs

The hot bed is made of heavy-duty tempered glass that lets it ramp up to 212℉\100℃ within 5 minutes. 4 sturdy springs for easier leveling are added to ensure a long lifespan.

a
  • Auto Leveling + Manual Leveling
  • 2.8" LCD Touch Screen
  • Resume Printing & Filament Detection
  • Glass Hotbed with 4 Strong Springs
  • Overcurrent Protect & Overload Protect & Overheat Protect
  • Easy Installation & Operate
SPECIFICATION

Printing Resolution: ±0.1 mm (±0.004 inches)

Slice Thickness: 0.1-0.3 mm (0.004-0.01 inches)

Travel Speed: 10-300 mm/s (0.39-11.81 inches/s)

Printing Speed: 20-150 mm/s(0.79-5.91 inches/s)(recommended speed: 30-60 mm/s (1.18-2.36 inches/s))

Standard Nozzle Diameter: 0.4 mm (0.016 inches)

Extruder Working Ttemperature: ≤ 250℃ (≤ 482°F)

Hotbed Temperature: ≤ 100℃ (≤ 212°F)

XY axis Positioning Accuracy: 0.012 mm (0.0005 inches)

Z axis Positioning Accuracy: 0.004 mm (0.0002 inches)

DIMENSION

Machine Size: 440 x 340 x 480mm (17.3 x 13.4 x 18.9 inches)

Package Size: 480 x 455 x 210mm (18.9 x 17.9 x 8.3 inches)

Printing Size: 220 x 220 x 250 mm (8.7 x 8.7 x 9.8 inches)

Machine Net Weight: 7.2±0.2 kg (15.9±0.4 lbs.)

Package weight: 8.8±0.2kg (19.4±0.4lbs)

Frame Material: aluminum

Hotbed Material: PCB and tempered glass

Number of Nozzles: 1

SPECIFICATION

Max. Power supply: US: 110V AC 240W

Printing: Online/ Offline

Screen: 2.80-inch touch screen

Language: English/ Chinese

Compatible File Formats: STL, OBJ, JPG

Auto Leveling: Yes

Main Software: Cura, Repetier, Simplify3D

Operating System: Windows, MAC

Recommended Material: PLA

Filament: 1.75 mm (0.07 inches)

f

Filament dispenser

When you insert the filament into the dispenser at the first time, remember to press the spring like what we did in the picture so that the filament could be easily sent to the extruder.

f

g

h

u

r

e

w

Innovative gift for kids

Unlock your full creative potential by 3D printing! Even your kids will love this easy-to-use 3d printer.

High Precision Printing

For the production of both functional and aesthetic prototypes, this high precision 3d printer is perfect.

Ideal for STEM Projects

Time to put your knowledge into practice. 3D printing will help both professional and hobbyists discover the wonders of all the STEM fields.

Looking for specific info?

Product information

Feedback

Orion

Orion Motor Tech Auto-Leveling 3D Printer with Resume Printing Function, 2.8-Inch Sensitive Touch Screen, and Filament Detection, Stable Structure Sealed Metal Plates 220x220x250mm

Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?
/
/
/
/
Please sign in to provide feedback.

Customer reviews

3.4 out of 5 stars
3.4 out of 5
20 global ratings

Customers say

Customers like the ease of assembly, quality and ease of use of the 3D printer. For example, they mention it's simple to put together, produces strong print quality for the price and the touch screen is very easy to use. That said, some complain about the heat up and performance.

AI-generated from the text of customer reviews

5 customers mention5 positive0 negative

Customers find the 3D printer easy to assemble and operate. They say it's a simple 3D printing machine that takes no setup time. Customers also say the user interface is intuitive and friendly. They mention that manual leveling is very easy to do.

"...The user interface is intuitive and friendly. Although he hasn’t tried its auto-leveling function yet, the manual leveling is very easy to do...." Read more

"This item really showed promise. Assembly was easy. Printing, the first time, worked fine...." Read more

"...But with that being said, This a very simple 3d printer to put together and operate...." Read more

"It is a pretty good printer takes like no setup time the only problem I had was the address card was bad so I had to reformat it" Read more

4 customers mention4 positive0 negative

Customers are satisfied with the quality of the 3D printer. They mention that it is a great product with a glass bed and a strong print quality for the price. Some customers also mention that the touch screen is very easy to use.

"...The print quality is pretty good and the touch screen is very easy to use...." Read more

"...Pros: Touch screen, glass bed, strong print quality for price, easy to assemble...." Read more

"Amazingly cheaper but much better quality but the sd card wasnt the best of quality" Read more

"Fun, easy to use, great quality printer!..." Read more

3 customers mention3 positive0 negative

Customers find the 3D printer easy to use. They mention that the touch screen is very easy to operate.

"...The print quality is pretty good and the touch screen is very easy to use...." Read more

"...Pros: Touch screen, glass bed, strong print quality for price, easy to assemble...." Read more

"Fun, easy to use, great quality printer!..." Read more

8 customers mention4 positive4 negative

Customers are mixed about the performance of the 3D printer. Some mention that it works well, while others say that it has some issues and trouble from the start.

"Works good but some minor inconvenience like have to re level every time you turn it off and turn it off and back on for it to read your flash drive" Read more

"...When I started the unit the second time, Extruder stopped working. I emailed 3 days in a row looking for help. My emails went unanswered...." Read more

"...This is a Creality Ender 3 clone which preforms well. I believe there is a better model of the same printer which is quieter...." Read more

"This item was not completely working when I got it. I put it together and the hot bed never heated up...." Read more

3 customers mention0 positive3 negative

Customers are dissatisfied with the heat up of the 3D Printer. They mention that it would not heat up.

"...I put it together and the hot bed never heated up. I tried to print anyways and never got a full print...." Read more

"...We made sure all the connections were good, but this 3-D Printer would not heat up past 25-27 Degrees...." Read more

"Had trouble from the start. Extuder would stop heating half way threw a 10 hr print. Happend several times. Replaced extruder, still does the sam...." Read more

Good 3D Printer
4 Stars
Good 3D Printer
I'm not sure if this is an Orion Motor Tech Auto-Leveling 3D Printer or an Anet ET4. There is no label on the machine. But with that being said, This a very simple 3d printer to put together and operate. The print quality is pretty good and the touch screen is very easy to use.As for the print quality as per the pictures included, the self watering planter due to the fact that I ran out of green filament I had to use PLA MAX Orange PLA PLUS filament to finish up the planter. The printer blended the two colors very well and very few imperfections show in this piece. The sample dog file that comes with the printer printed well also. The printer does make noise most of the time as it prints but then quiets down after a while, but not by much.Putting the printer together didn't take long at all and was up and printing 20 minutes after assembly. The auto leveling works well. It's a 25 point bed leveling system and when it's done the touch screen display will indicate that auto bed leveling is complete.I would recommend this printer to beginners. This is a Creality Ender 3 clone which preforms well. I believe there is a better model of the same printer which is quieter. I would/will be getting another one of these printers in the future. I didn't rate the tech support because I haven't had to deal with the tech support.
Hide
Thank you for your feedback
Sorry, there was an error
Sorry we couldn't load the review

Top reviews from the United States

Dr. E
5.0 out of 5 stars Fun, easy to use, great quality printer!
Reviewed in the United States on February 4, 2020
Verified Purchase
The media could not be loaded.
 This Orion Motor Tech 3-D printer is built on a full metal frame instead of aluminum frame, thus it is very sturdy and does not vibrate much when printing. The printing controls are set through its 2.8” touchscreen. The user interface is intuitive and friendly. Although he hasn’t tried its auto-leveling function yet, the manual leveling is very easy to do. The printing noise was surprisingly low. One would be able to sleep without interruption when the printer is printing at full speed in another room.

My 14 year old son was able to assemble this 3-D printer under an hour by following the paper instructions it came with and an online video he watched (keyword Anet ET4). The only problem he encountered was the microSD card that came with the printer. The microSD card contained 3 sample files, a slicer program and user’s manuals. He was able to print the sample file and install the slicer program onto his PC without too much hassle. However, when he tried to print his creation using the microSD, the LCD readout of the printer would just show the printing status going from 0% to 100% in a few seconds and state that the printing process was done when it actually did nothing. After briefly researching online, he was able to pinpoint the problem to its faulty memory card and found that it was a common problem a few other users encountered. After replacing the problematic microSC card with another, the printer started to consistently provide quality print and it did not give too much trouble afterward. As for the slicer program, the most updated Cura is recommended. Instructions regarding the setting can be found in the user's manual.

All in all, it was a good purchase.
Customer image
Dr. E
5.0 out of 5 stars Fun, easy to use, great quality printer!
Reviewed in the United States on February 4, 2020
This Orion Motor Tech 3-D printer is built on a full metal frame instead of aluminum frame, thus it is very sturdy and does not vibrate much when printing. The printing controls are set through its 2.8” touchscreen. The user interface is intuitive and friendly. Although he hasn’t tried its auto-leveling function yet, the manual leveling is very easy to do. The printing noise was surprisingly low. One would be able to sleep without interruption when the printer is printing at full speed in another room.

My 14 year old son was able to assemble this 3-D printer under an hour by following the paper instructions it came with and an online video he watched (keyword Anet ET4). The only problem he encountered was the microSD card that came with the printer. The microSD card contained 3 sample files, a slicer program and user’s manuals. He was able to print the sample file and install the slicer program onto his PC without too much hassle. However, when he tried to print his creation using the microSD, the LCD readout of the printer would just show the printing status going from 0% to 100% in a few seconds and state that the printing process was done when it actually did nothing. After briefly researching online, he was able to pinpoint the problem to its faulty memory card and found that it was a common problem a few other users encountered. After replacing the problematic microSC card with another, the printer started to consistently provide quality print and it did not give too much trouble afterward. As for the slicer program, the most updated Cura is recommended. Instructions regarding the setting can be found in the user's manual.

All in all, it was a good purchase.
Images in this review
Customer image Customer image
Customer imageCustomer image
One person found this helpful
Helpful
 Report
Frank Torrano
1.0 out of 5 stars It worked once, ONCE! No customer service!
Reviewed in the United States on March 27, 2020
Verified Purchase
This item really showed promise. Assembly was easy. Printing, the first time, worked fine. When I started the unit the second time, Extruder stopped working. I emailed 3 days in a row looking for help. My emails went unanswered. Not even so much as an automatic reply. I am returning it today. Save yourself a headache look to another machine, look to another company.
Helpful
 Report
Anoymis
3.0 out of 5 stars 👌
Reviewed in the United States on February 5, 2020
Verified PurchaseEarly Reviewer Rewards(What's this?)
Works good but some minor inconvenience like have to re level every time you turn it off and turn it off and back on for it to read your flash drive
Helpful
 Report
Marvin E.
4.0 out of 5 stars Good 3D Printer
Reviewed in the United States on March 1, 2020
Verified Purchase
I'm not sure if this is an Orion Motor Tech Auto-Leveling 3D Printer or an Anet ET4. There is no label on the machine. But with that being said, This a very simple 3d printer to put together and operate. The print quality is pretty good and the touch screen is very easy to use.
As for the print quality as per the pictures included, the self watering planter due to the fact that I ran out of green filament I had to use PLA MAX Orange PLA PLUS filament to finish up the planter. The printer blended the two colors very well and very few imperfections show in this piece. The sample dog file that comes with the printer printed well also. The printer does make noise most of the time as it prints but then quiets down after a while, but not by much.
Putting the printer together didn't take long at all and was up and printing 20 minutes after assembly. The auto leveling works well. It's a 25 point bed leveling system and when it's done the touch screen display will indicate that auto bed leveling is complete.
I would recommend this printer to beginners. This is a Creality Ender 3 clone which preforms well. I believe there is a better model of the same printer which is quieter. I would/will be getting another one of these printers in the future. I didn't rate the tech support because I haven't had to deal with the tech support.
Customer image
Marvin E.
4.0 out of 5 stars Good 3D Printer
Reviewed in the United States on March 1, 2020
I'm not sure if this is an Orion Motor Tech Auto-Leveling 3D Printer or an Anet ET4. There is no label on the machine. But with that being said, This a very simple 3d printer to put together and operate. The print quality is pretty good and the touch screen is very easy to use.
As for the print quality as per the pictures included, the self watering planter due to the fact that I ran out of green filament I had to use PLA MAX Orange PLA PLUS filament to finish up the planter. The printer blended the two colors very well and very few imperfections show in this piece. The sample dog file that comes with the printer printed well also. The printer does make noise most of the time as it prints but then quiets down after a while, but not by much.
Putting the printer together didn't take long at all and was up and printing 20 minutes after assembly. The auto leveling works well. It's a 25 point bed leveling system and when it's done the touch screen display will indicate that auto bed leveling is complete.
I would recommend this printer to beginners. This is a Creality Ender 3 clone which preforms well. I believe there is a better model of the same printer which is quieter. I would/will be getting another one of these printers in the future. I didn't rate the tech support because I haven't had to deal with the tech support.
Images in this review
Customer image Customer image Customer image Customer image
Customer imageCustomer imageCustomer imageCustomer image
Helpful
 Report
Sam
2.0 out of 5 stars two and a half stars, great for fun but not configurable and unable to dial in.
Reviewed in the United States on February 6, 2020
Verified Purchase
Great for fun but not configurable and unable to dial in, mine the axis are out by +/-.5mm to +/-.8mm.
Which doesn't sound like much but when you print something and the X & Y doesn't line up it doesn't look good.
if all you are going for is toys and don't care if it looks like some of it was done by hand it's great.
But the 3 flexi's i tried to print didn't come out so good half don't flex like they should.
All the printer needs is a way to adjust the steps and calibrate it and i would give it 4 stars.
it's a good little intro to 3d printing machine though but i got frustrated with it fast since i can't fix the small issues.
One person found this helpful
Helpful
 Report
Braden
5.0 out of 5 stars SD CARD REFORMAT
Reviewed in the United States on February 8, 2020
Verified PurchaseEarly Reviewer Rewards(What's this?)
It is a pretty good printer takes like no setup time the only problem I had was the address card was bad so I had to reformat it
Helpful
 Report
AsphaltStudios
1.0 out of 5 stars Beware of the clone.
Reviewed in the United States on April 22, 2020
Verified Purchase
This item was not completely working when I got it. I put it together and the hot bed never heated up. I tried to print anyways and never got a full print. I did research and it seems that these guys are selling Anet clones and these have the hot bed defect where you might be able to solder the wires and get it to work again but I was not willing to take that chance.
Helpful
 Report
Ino
3.0 out of 5 stars Ho-hum
Reviewed in the United States on April 14, 2020
Verified Purchase
Has some issues but once you figure them out it's an ok printer
Helpful
 Report