This is a well built pedal, no question about it. The foot switch/button is smooth, positive and quiet. This is a silent pedal when not activated so it also serves as a handy mute feature for anything past the tuner.
Accuracy is spot-on in accordance with my Korg tuner (Y-splitter with the two side-by-side), the Donner matches approximately 1 cent accuracy - this is more than sufficient for ANY gigging or recording that I ever plan to do.
The bottom of the pedal includes nice rubber pads that keep the pedal in place on hard surfaces, yet they're thin enough that Velcro/hook-and-loop will protrude enough to mount to a board with Velcro without having to remove the rubber feet - while this seems like a minor thing, IMO this is huge and I wish more pedal manufacturers did this.
The case is super tough (metal) and the surface has a nice matte finish which reduces reflection and glare from bright lighting - again this seems like a minor feature but it makes a big difference in the real world and it goes to show that Donner has thought through EVERY detail of this pedal. And I have found that what is apparent on the outside is consistent with the attention to detail given to the inside.
Of course as with most pedals it does not come with a DC power supply but if you're reading pedal reviews you probably already know this :) and you probably also have a variety of workarounds. I prefer a battery clip snap connector anyway (search "Mr. Power 9V Battery Clip Converter 2.1mm 5.5mm" - they're $3ea) or just chaining another connector on my board's DC power supply, no biggie. I don't understand why some people complain about this - powering a pedal isn't complicated or expensive. In fact, I appreciate pedal manufacturers keeping prices low while allowing ME to decide how to power the thing anyway.
The ONLY potential downside is the brightness of the LED, particularly the red, it's borderline blinding (the pics don't begin to illustrate it :)) The LCD display is awesome, lots of useful indicators in there that help bring you to tune quickly but in low light conditions the red LED is overpowering; in low lighting I can't even read the display until the green LED kicks in - at which time I don't need to see the LCD display screen. I may dim it with some tape to take the bright edge off - and of course mine may be an exception but I thought I'd share just the same.
Overall this is a minor issue and doesn't take away from the awesomeness of this pedal. IMO it's worth every dime, it's WAY better built than its competitors in the price range and it performs at least as good as (if not notably better than) other tuners I have that cost 2x as much or more.
It's hard to imagine regretting this purchase, I plan to get one for each amp even though I don't have pedal boards for each amp. At this price I think everyone should have one sitting on/near every amp.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Similar item to consider
Amazon's Choice
Add a debit or credit card to save time when you check out
Convenient and secure with 2 clicks. Add your card
Frequently bought together
$28.79
Get it as soon as Monday, May 13
In Stock
+
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Top rated similar items
Page 1 of 1 Start overPage 1 of 1
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
7:07
Click to play video
Customer Review: Best $20.00 I have Ever Spent!!
E. Phares
Videos for this product
1:59
Click to play video
Donner Noise Gate Pedal Review | You Have To Hear This
Chris Rupp
Videos for this product
1:36
Click to play video
Customer Review: Way to bright to read
Derick Snyder
Product Description
Bright LED Screen
- LED Light indicator shows the working state. And it’s easy to read the right tone.
- Suitable on large stage and outdoor performance venues without any problems.
Precise and Powerful Tuner
- Chromatic which is suitable for wide range tuning.
- Tuning range is A0(27.5Hz) ~ C8(4186Hz). New fast precise strobe mode with +/- 1 cent accuracy.
Donner Mini Guitar Pedals
 Delay Pedal |  Looper Pedal |  Reverb Pedal |  Distortion Pedal |  Fuzz Pedal | |
|
Customer Reviews
|
18,346
|
18,346
|
18,346
|
18,346
|
18,346
|
|
Price
| $29.99 | $59.99 | $42.49 | $47.59 | $33.99 |
|
Power Supply
| 9V DC(Not Included) | 9V DC(Not Included) | 9V DC(Not Included) | 9V DC(Not Included) | 9V DC(Not Included) |
|
Battery
| ✘ | ✘ | ✘ | ✘ | ✘ |
|
True Bypass
| ✔ | ✘ | ✔ | ✔ | ✔ |
|
Weight
| 8.8 ounces | 8.8 ounces | 8.8 ounces | 8.8 ounces | 8.8 ounces |
|
Dimension
| 3.7 "L x 1.69"W x 2.01"H | 3.7 "L x 1.69"W x 2.01"H | 3.7 "L x 1.69"W x 2.01"H | 3.7 "L x 1.69"W x 2.01"H | 3.7 "L x 1.69"W x 2.01"H |
From the brand
GUITAR EFFECT PEDALS
INSPIRE YOUR SOUND
-
-
-
-
-
-
-
Circle Looper Pedal
40 Slots 160 mins Loop Pedal with Drum Machine
-
Since 2012, Donner has been committed to creating new musical experiences. Our passionate and dedicated R&D team continues to innovate with high-quality and affordable musical instruments and accessories that enrich the lives of our customers.
Reviews with images
Cool pedal
It's cool have to tweak it for a good min to get my type of wah. Will prefer manual wah this could be a nice back up but the pedal itself 10/10 solid lil pedal
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on November 13, 2020
Color: Black TunerVerified Purchase
This is a well built pedal, no question about it. The foot switch/button is smooth, positive and quiet. This is a silent pedal when not activated so it also serves as a handy mute feature for anything past the tuner.
Accuracy is spot-on in accordance with my Korg tuner (Y-splitter with the two side-by-side), the Donner matches approximately 1 cent accuracy - this is more than sufficient for ANY gigging or recording that I ever plan to do.
The bottom of the pedal includes nice rubber pads that keep the pedal in place on hard surfaces, yet they're thin enough that Velcro/hook-and-loop will protrude enough to mount to a board with Velcro without having to remove the rubber feet - while this seems like a minor thing, IMO this is huge and I wish more pedal manufacturers did this.
The case is super tough (metal) and the surface has a nice matte finish which reduces reflection and glare from bright lighting - again this seems like a minor feature but it makes a big difference in the real world and it goes to show that Donner has thought through EVERY detail of this pedal. And I have found that what is apparent on the outside is consistent with the attention to detail given to the inside.
Of course as with most pedals it does not come with a DC power supply but if you're reading pedal reviews you probably already know this :) and you probably also have a variety of workarounds. I prefer a battery clip snap connector anyway (search "Mr. Power 9V Battery Clip Converter 2.1mm 5.5mm" - they're $3ea) or just chaining another connector on my board's DC power supply, no biggie. I don't understand why some people complain about this - powering a pedal isn't complicated or expensive. In fact, I appreciate pedal manufacturers keeping prices low while allowing ME to decide how to power the thing anyway.
The ONLY potential downside is the brightness of the LED, particularly the red, it's borderline blinding (the pics don't begin to illustrate it :)) The LCD display is awesome, lots of useful indicators in there that help bring you to tune quickly but in low light conditions the red LED is overpowering; in low lighting I can't even read the display until the green LED kicks in - at which time I don't need to see the LCD display screen. I may dim it with some tape to take the bright edge off - and of course mine may be an exception but I thought I'd share just the same.
Overall this is a minor issue and doesn't take away from the awesomeness of this pedal. IMO it's worth every dime, it's WAY better built than its competitors in the price range and it performs at least as good as (if not notably better than) other tuners I have that cost 2x as much or more.
It's hard to imagine regretting this purchase, I plan to get one for each amp even though I don't have pedal boards for each amp. At this price I think everyone should have one sitting on/near every amp.
Accuracy is spot-on in accordance with my Korg tuner (Y-splitter with the two side-by-side), the Donner matches approximately 1 cent accuracy - this is more than sufficient for ANY gigging or recording that I ever plan to do.
The bottom of the pedal includes nice rubber pads that keep the pedal in place on hard surfaces, yet they're thin enough that Velcro/hook-and-loop will protrude enough to mount to a board with Velcro without having to remove the rubber feet - while this seems like a minor thing, IMO this is huge and I wish more pedal manufacturers did this.
The case is super tough (metal) and the surface has a nice matte finish which reduces reflection and glare from bright lighting - again this seems like a minor feature but it makes a big difference in the real world and it goes to show that Donner has thought through EVERY detail of this pedal. And I have found that what is apparent on the outside is consistent with the attention to detail given to the inside.
Of course as with most pedals it does not come with a DC power supply but if you're reading pedal reviews you probably already know this :) and you probably also have a variety of workarounds. I prefer a battery clip snap connector anyway (search "Mr. Power 9V Battery Clip Converter 2.1mm 5.5mm" - they're $3ea) or just chaining another connector on my board's DC power supply, no biggie. I don't understand why some people complain about this - powering a pedal isn't complicated or expensive. In fact, I appreciate pedal manufacturers keeping prices low while allowing ME to decide how to power the thing anyway.
The ONLY potential downside is the brightness of the LED, particularly the red, it's borderline blinding (the pics don't begin to illustrate it :)) The LCD display is awesome, lots of useful indicators in there that help bring you to tune quickly but in low light conditions the red LED is overpowering; in low lighting I can't even read the display until the green LED kicks in - at which time I don't need to see the LCD display screen. I may dim it with some tape to take the bright edge off - and of course mine may be an exception but I thought I'd share just the same.
Overall this is a minor issue and doesn't take away from the awesomeness of this pedal. IMO it's worth every dime, it's WAY better built than its competitors in the price range and it performs at least as good as (if not notably better than) other tuners I have that cost 2x as much or more.
It's hard to imagine regretting this purchase, I plan to get one for each amp even though I don't have pedal boards for each amp. At this price I think everyone should have one sitting on/near every amp.
Images in this review
Top reviews from other countries
francisco barriopedro
Funcional y de buena calidad
Reviewed in Mexico on April 6, 2024Color: Green ModVerified Purchase
Marnie
Great value, solid, sounds great!
Reviewed in Canada on March 23, 2024Color: Blue ChorusVerified Purchase
Marnie
Reviewed in Canada on March 23, 2024
Images in this review
Joe C.
Sehr , sehr positiv überrascht
Reviewed in Germany on April 13, 2024Color: Red OctaveVerified Purchase
PHK
Excellent rapport qualité prix
Reviewed in France on March 18, 2024Color: Green ModVerified Purchase
Mattia
Pedale consigliato.
Reviewed in Italy on March 8, 2024Color: Blue ChorusVerified Purchase
Mattia
Reviewed in Italy on March 8, 2024
Images in this review
