Space age headphone stand? Pretty much, but with a touch of elegance and highly functional. What I mean by that is if you have wireless headphones with a detachable cable then the Avantree headphone stand is a great buy.
The top of the stand provides great versatility from a wide range of headphones/headsets. I currently have the Logitech G633 Spectrum sitting on top of my Avantree, situated on a transparent glass desk. What I appreciate is I can leave the headphones at their enclosed width without needing to expand them to fit the stand, and if you've never seen the G633 they are pretty massive headphones!
The base of the stand is where functionality comes in. It's a great place to put your headphone cables that is easily accessible. I will say that if you have embedded cables (not detachable) then you may not want to go with this stand unless your headphones are very deep and leave minimal space between your headphones and the base.
Why should you consider this? I believe the main selling point of this stand is:
#1. Reduce clunky headphone placement on your desk
#2. Provide a stand for your headphone
If you have cables from your headphones that are crinkled and not properly tethered, then you basically have a stand similar to a messy hair day. Not very pleasing to look at.
The silicon top and base provide great scratch protection for those concerned about the physical condition of your headphones/headsets. Steel construction of the stand ensures that your headphones won't be flopping around which is great as some people may not have a supportive desk underneath.
Assembly was very easy, however the silicon padding for the bottom of the stand did worry me at first as it was not making 100% contact with the stand. After a few seconds of wiggling around I managed to secure the silicon base to the stand and attempted to knock down the stand with gentle force applied to the left and right of the stand. Good news, it didn't go down!
So should you buy these? If you have detachable cables sure, if not then you may want to measure your headphones and see if they create a 1"-2" gap from the full 9.84" height of the stand. Another option is to tether your cable thoroughly so it's smooth texture wraps around the base of the stand.
Thanks for reading!
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
There is a newer model of this item:
Consider a similar item
Amazon's Choice
$14.99
Climate Pledge Friendly Frequently bought together
$19.99
Get it as soon as Friday, May 3
In Stock
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Global Recycled Standard (GRS) verifies the percentage of recycled content and tracks it from the source to the final product.
From the brand
Product Description
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| HS102 | TR902 | HS908 | HS907 | HS906 | HS910 | |
|
|
||||||
| Customer Reviews |
7,642
|
1,413
|
3,916
|
11,041
|
3,617
|
88
|
| Price | $19.99 | $29.99 | $19.99 | $9.99 | $14.99 | — |
| Features | Basic | Higher Height for Big Headphones | Super Stable with Weighted Base | Mutipurpose | Mutipurpose | B093GP5PKV |
| Height | 9.8 inch | 12 inch | 9.8 inch | - | 10.24 inch (Adjustable) | 9.5 inch |
| Storage Tray | Circle - 5.9 inch | Ellipse - 6.9 x 5.3 inch | Rectangle - 7 x 4.7 inch | - | - | - |
| Usage Scenarios | Desk | Desk | Desk | Desk / Wall | Desk / Shelf | Desk |
| Meterial | Solid Steel + Silicone | Bamboo + Solid Steel | Metal + ABS + Aluminum Alloy | ABS + Silicone | ABS + Silicone | ABS + Silicone + Aluminum Alloy |
Compare with similar items
This Item  Avantree Metal & Silicone Headphone Stand Hanger with Cable Holder, Black Desk Earphone Mount Rack for Sennheiser, Sony, Bose, Beats Gaming Headset Display, Fancy Music Studio Accessories - HS102 |  |  |  |  |  | |
| Price | $19.99 | -26% $25.99 List: $34.99 | -14% $24.93 List: $28.99 | -20% $29.59 List: $36.99 | $34.99 | -10% $8.99 List: $9.99 |
| Delivery | Get it as soon as Friday, May 3 | Get it as soon as Friday, May 3 | Get it as soon as Friday, May 3 | Get it as soon as Friday, May 3 | Get it as soon as Friday, May 3 | Get it as soon as Friday, May 3 |
| Customer Ratings | ||||||
| Easy to assemble | ||||||
| Sturdiness | ||||||
| Value for money | ||||||
| Quality of material | ||||||
| Adhesion | ||||||
| Sold By | AvantreeDirect USA | TotalMount - Innovelis, Inc. | Wrightmart | Wrightmart | KW-Commerce-US | 10Plus |
| compatible devices | Headphones | Headphones | — | Headphones | Headphones | Headphones |
| material | Metal, Silicone | — | Wood | Wood, Alloy Steel | Artificial Leather | Aluminum, Silicone, Plastic, Rubber, Metal |
| style | desktop headphone stand with cable holder | — | Natural Wood | — | Universal | Universal |
| special feature | Stable & Anti Slip with Cable Holder | — | Base Storage Tray, Decorative, Handmade, Natural Acacia Wood | Sturdy Design, Universal Fit, No-Tip Stability, Extra-Large Base | Dimensions: 10-1/4" high x 6-1/4" wide x 4-3/4" deep | Noise-Canceling, wireless, Universal |
| weight | 360 grams | — | — | — | 0.5 kilograms | 120 grams |
Reviews with images
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on January 31, 2017
Reviewed in the United States on January 1, 2024
Simple design. Do what they are supposed to do. Inexpensive compared to others. The stand is metal and sturdy.
Images in this review
Reviewed in the United States on February 10, 2024
Reviewed in the United States on July 28, 2016
Reviewed in the United States on March 3, 2017
I looked around for a few days and saw what I considered to be quite an impressive selection from which to choose, some constructed of exotic wood, some of metal, some that were acrylic, etc. And I found some that were so ridiculously priced that such an investment didn't seem to be practical. I came across this stand here on Amazon and was immediately attracted to the price and then to the reviews. It seemed to me that this stand might just be perfect for my needs, so I bought it. I actually tried to cancel my order so that I could purchase a slightly more expensive stand but it was too late to do so. As it turned out I'm very happy that I wound up receiving this one.
I opened the package and began by sliding the rubber base over the stand and putting it in place and noticed that the rubber had a tendency to come off of the steel at the base so I placed a couple of strips of double sided tape on that section and then pushed the rubber tray into place again and the problem was solved. Next, I removed the tape strips from the underside of the top piece in order to apply to the top. It was a little tricky to get the top rubber cradle to firmly press into proper position but not too difficult. In my case I had to gently tug to get the lip on each side to get it fully situated in place.
My headphones are most often connected to a small desktop DAC/Amplifier and thus the standard cord was just way too long so I have them connected via an inexpensive 1.2 meter replacement that fits nicely in the bottom. The stock 9 foot cable will prove to be a hassle to deal with, I think. The headband of the HD 600 sits nicely on top of the curved soft rubber top piece and I can't see it causing any long term damage to the cushions. You will be able to use this stand with Cans who's headbands are up to about 1.5 inches in width before they won't rest firmly inside the top slot. All in all I really like this inexpensive stand!
This is very nice, and it won't break the bank.
Reviewed in the United States on March 3, 2017
Ordinarily I choose to store my headphones in hard cases when I'm not using a particular pair and I work them in and out of the rotation often. I hadn't really considered the idea of buying a headphone stand until after buying the most recent pair, these Sennheiser HD 600 currently displayed on the stand. I decided to buy one now because the thought occurred to me that even being left on my desk wasn't probably entirely the safest place to be out of the way and safe from drink spills, etc. I figured a headphone stand would make sense to use between listening sessions rather than going through having to box them up all the time and dragging them back out again the next. Made sense to me!Reviewed in the United States on March 3, 2017
I looked around for a few days and saw what I considered to be quite an impressive selection from which to choose, some constructed of exotic wood, some of metal, some that were acrylic, etc. And I found some that were so ridiculously priced that such an investment didn't seem to be practical. I came across this stand here on Amazon and was immediately attracted to the price and then to the reviews. It seemed to me that this stand might just be perfect for my needs, so I bought it. I actually tried to cancel my order so that I could purchase a slightly more expensive stand but it was too late to do so. As it turned out I'm very happy that I wound up receiving this one.
I opened the package and began by sliding the rubber base over the stand and putting it in place and noticed that the rubber had a tendency to come off of the steel at the base so I placed a couple of strips of double sided tape on that section and then pushed the rubber tray into place again and the problem was solved. Next, I removed the tape strips from the underside of the top piece in order to apply to the top. It was a little tricky to get the top rubber cradle to firmly press into proper position but not too difficult. In my case I had to gently tug to get the lip on each side to get it fully situated in place.
My headphones are most often connected to a small desktop DAC/Amplifier and thus the standard cord was just way too long so I have them connected via an inexpensive 1.2 meter replacement that fits nicely in the bottom. The stock 9 foot cable will prove to be a hassle to deal with, I think. The headband of the HD 600 sits nicely on top of the curved soft rubber top piece and I can't see it causing any long term damage to the cushions. You will be able to use this stand with Cans who's headbands are up to about 1.5 inches in width before they won't rest firmly inside the top slot. All in all I really like this inexpensive stand!
Images in this review
Top reviews from other countries
Damian
Genial!
Reviewed in Mexico on September 29, 2023
Damian
Reviewed in Mexico on September 29, 2023
La base y soporte donde reposan los audífonos son de silicona pero se nota que es de muy buena calidad ya que no se le pega el polvo.
La silicona es flexible pero esto no afecta la estabilidad y rigidez del soporte al poner los audífonos.
Images in this review
Isabella
Essenziale e ben fatto
Reviewed in Italy on January 23, 2024
Isabella
Reviewed in Italy on January 23, 2024
Images in this review
Bompoil
Bonne stabilité
Reviewed in France on August 27, 2023
Bompoil
Reviewed in France on August 27, 2023
Images in this review
